![background image](http://html.mh-extra.com/html/gharieni/601/601_instruction-manual_2220184053.webp)
52
13. Heating system (optional equipment)
❖
The upholstery surface of the 601 can be heated to increase comfort.
It is a pre-programmed and fully automatic heating system which allows
comfortable operation. This heating system is integrated in the upholstery of
the treatment table and works with modern microprocessor technology.
For the 601, the heating system is optionally available at extra cost.
❖
Due to the pre-programmed microchip, you only must switch on the heating
system to start the heating system with the lowest heat / power level.
To quickly heat up the bed‘s surface before starting treatment, we recommend
setting the heating system to level 3 (highest level).
The heating program is fully automated and switches off automatically after
a total time of 90 minutes.
➢
s. chapter 13.1
OPERATION
.
❖
The drive system locks automatically after 30 minutes of inactivity.
The heating cycle currently in process is
not affected
by this.
❖
Even a manual locking
does not affect
the heating cycle currently in process
and has
no effect on the operation of the heating system either.
➢
s. chapter 11.6
LOCKING FUNCTION
/
LOCKING BUTTON OF THE
HAND CONTROL
.
CAUTION!
If your 601 is equipped with the optionally available
heating system, do not place heavy blankets, clothing or similar on the
upholstery while the heating system is switched on. RISK OF DAMAGE!
RISK OF BURNS!
NOTICE!
The currently active heating level is visualized via an LED
(diode) in the middle of the upper section of the hand control.
The frequency of the impulse for visualization varies accordingly.
Summary of Contents for 601
Page 33: ...32 ...
Page 58: ...57 ODER FIG 16 FIG 17 ...