GHARiENi 601 Instruction Manual Download Page 60

Page: 60 / 82

15.1. Repair

YOU CAN CONTACT GHARIENI CUSTOMER SERVICE

USING THE FOLLOWING CONTACT DETAILS

CUSTOMER

ERVICE

OTLINE

+49 (0)2841/88300-40

E-M

AIL

[email protected]

Please use the form that opens after scanning the QR-Code in the Internet

browser of your suitable end device if you have problems with your 601 or if

you should notice any damage.
In this way you can send information to our customer service easily, simply, and

quickly. See also chapter 8.

CODE

We consider ourselves responsible for the safety and reliability of the 601 only if

repairs and modifications are carried out by us or a person authorized by us.
Furthermore, the electrical installation must comply with the regulations

(VDE 0100 or 107) and the 601 must be used in accordance with the operating

instructions.

In case of improper modifications or manipulations to the 601,

any

warranty on

behalf of Gharieni Group GmbH is excluded.

The treatment table can remain connected to the mains and does not need to be

disconnected from the mains for daily use.

Check the power cord regularly for signs of damage.

If the mains cable is damaged, it may only be replaced by Gharieni Group

GmbH, or a customer service authorized by Gharieni Group GmbH or a

qualified specialist (electrical engineer).

DANGER!

In case of defects or malfunctions of the treatment table,

contact customer service

immediately

. Use of the treatment table

must

be discontinued until the problem has been solved to avoid further
damage to property and persons.

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands