![background image](http://html.mh-extra.com/html/gharieni/601/601_instruction-manual_2220184045.webp)
44
11.2 Adjustment of the working height
Use button
T1
to adjust the
WORKING HEIGHT
; s. fig. in chapter 11.1
HAND
CONTROL
.
For the direction of movement, please note the arrow symbols and the number
of points above on the hand control.
Press the button once and keep it pressed to raise the 601.
Press and the button twice (double-tap system) and keep it pressed to lower it.
❖
The horizontal
WORKING HEIGHT
of the 601 can be adjusted from approx. 59
cm to approx. 99 cm (with the stands screwed in).
❖
The horizontal
WORKING HEIGHT
of the 601
with soft upholstery
can be
adjusted
from approx. 64 cm to approx. 104 cm
due to the slightly thicker
upholstery (with the stands screwed).
❖
By unscrewing the stands (up to approx. 3 cm) you raise the working height
somewhat.
❖
By using the optionally available lockable castors, you raise the working height
by approx. 5.5 cm.
➢
The
ENTRY HEIGHT
is the lowest setting of the seat.
This is indicated in the horizontal position of the seat.
➢
601 (standard upholstery) = approx. 59 cm / seat in horizontal position
➢
601 (soft upholstery) = approx. 64 cm / seat in horizontal position
To recall the fixed entry position, press program button
P1
on the hand control
and keep it pressed
until
the entry position is reached.
11.3 Adjustment of the backrest
❖
The inclination of the backrest can also be adjusted by using the hand control.
❖
Use the corresponding button (
T 2
) to adjust the
BACKREST
; s. fig. in chapter
11.1
HAND CONTROL
.
❖
For the direction of movement, please note the arrow symbols and the number
of points above on the hand control
.
❖
Press the button once and keep it pressed to raise the backrest.
Press the button twice (double-tap system) and keep it pressed to lower the
backrest.
WARNING!
When setting the treatment position, make sure that
there are no body parts, objects, or persons between the bed
components. RISK OF CRUSHING!
Summary of Contents for 601
Page 33: ...32 ...
Page 58: ...57 ODER FIG 16 FIG 17 ...