GHARiENi 601 Instruction Manual Download Page 26

Page: 26 / 82

Illustration similar: color and design may vary depending on the model.

NOTICE!

Follow our cleaning and care instructions for PU, artificial

leather, and Ferrari Stamskin! If you would like to use other cleaning
agents, be sure to contact our customer service before use. RISK OF
DAMAGE!

10. Operation

WARNING!

Never sit on the headrest or armrests.

WARNING!

Regardless of the bed

‘s

surface setting, do not exert any

physical force on the above-mentioned components. Non-compliance
with these instructions can permanently damage the support structure of
the 601. RISK OF TIPPING! RISK OF BREAKING! RISK OF INJURY!

10.1 Characteristics

❖

The 601 is a versatile treatment table that you can use e.g. cosmetic applications

or full body massages in dry rooms.

❖

The 601 is available in two upholstery variants (

STANDARD

and

SOFT

);

see chapter 9.

UPHOLSTERY

❖

The entry height due to the

SOFT

and thicker upholstery is approx. +5 cm

compared to the

STANDARD

upholstery.

❖

The 601 is also available in various upholstery widths (

SMALL

EDIUM

MALL

MEDIUM

/ see chapter 10.2

MODEL VARIANTS

❖

The Gharieni 601 is a treatment table with two lifting columns and two

actuators (see chapter 10.2

MODEL VARIANTS

) intended to adjust the table using

a hand control or an optional foot control.

❖

Working height, backrest, inclination of the seat area and legrest are electrically

adjustable. [The adjustment of the working height is achieved by synchronous

movement of the lifting columns (front and rear lifting columns move), the

adjustment of the seat inclination is achieved by asynchronous movement of the

lifting columns (only the front lifting column moves), see chapter 11.

ELECTRICAL ADJUSTMENTS

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands