GHARiENi 601 Instruction Manual Download Page 32

Page: 32 / 82

10.6 Headrest

WARNING!

Never exert physical force on the headrest, regardless of

the

treatment table’s

surface setting. Non-compliance with these

instructions can permanently damage the support structure. RISK OF
TIPPING! RISK OF BREAKAGE! RISK OF INJURY!

Use the locking pin to adjust the headrest, which is located under the headrest.

Pull the locking pin and adjust the headrest. Make sure that the locking pin audibly

engages again after setting.

The inclination angle of the headrest is manually adjustable in five preset levels

(+ 10°, 0°, -10°, -20°, - 90° ) (s. figures).

The headrest can also be pulled out manually by a maximum of 7 cm and
removed. The extension range of the headrest is limited to 7 cm via locking pin.

To extend the headrest, loosen the knurled screw and pull out the headrest

together with the mount as desired. Then tighten the knurled screw again.

The locking pin is located on the backrest frame, below the locking pin for
adjusting the inclination angle of the headrest (s. fig. 3).

NOTICE!

Be sure to tighten the knurled screw again. Otherwise the

headrest may fall out and damage the 601 and/or your customer may be
injured! RISK OF DAMAGE! RISK OF INJURY!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands