GHARiENi 601 Instruction Manual Download Page 7

Page: 7 / 82

1.2 Signal words

DANGER!

indicates a hazardous

situation which, if ignored, will result in

death or serious injury.

WARNING!

indicates a hazardous

situation which, if ignored, could result

in death or serious injury.

CAUTION!

indicates a hazardous

situation which, if not avoided, may

result in minor or moderate injury.

NOTICE!

indicates a hazardous

situation which, if not avoided, may

result in possible damage to the

treatment table.

1.3 Safety instructions

DANGER!

To reduce risk of electrocution:

1. Non-compliance with the instructions in this manual endangers the

operator’s and customer’s health and life and

/ or can damage the

601.

2. All electrical work to connect the 601 to the power supply must be

carried out by a qualified professional. Do not modify the power
supply. The connection must be carried out in accordance with the
current local and legal regulations.

3. The mains voltage and the mains frequency

must

correspond to

the values indicated on the rating plate.

4. Do not make any changes or manipulations to the 601 and / or its

power supply (mains cable, mains plug). In case of unauthorised
changes or manipulations,

any

warranty of the Gharieni Group

GmbH is excluded.

Do not connect

the 601 to the power supply if the 601 itself or the

power cable or the power plug are visibly damaged.

6. The power cable must not be under the 601 except Gharieni Group

GmbH expressly allows it. RISK OF ELECTRIC SHOCK!

7. Never roll the 601 over the power cable; otherwise you can

permanently damage the power cable.

8. The power cable must not be located under the adjustable stands

or under the optional castors of the 601. Otherwise they can crush
the power cable and cause permanent damage. RISK OF
ELECTRIC SHOCK!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands