GHARiENi 601 Instruction Manual Download Page 8

Page: 8 / 82

9. Never try to repair the 601 yourself. If the 601 does not operate

properly, please contact our customer service or your dealer.
Original spare parts should be used only.

10. If repair or replacement of the power supply cable and / or the

power supply plug is necessary, always commission a qualified
specialist (electrical engineer) or a customer service authorized by
Gharieni Group GmbH. Never repair or replace them yourself.
RISK OF ELECTRIC SHOCK!

11. Always disconnect the 601 from the power supply if you are not

going to use the treatment table for a long period of time.

12. Always disconnect the 601 from the power supply before cleaning

and / or maintenance. RISK OF ELECTRIC SHOCK!

13. Never use the power cable to pull the power plug. Always pull the

power plug itself to disconnect the 601 from the power supply.
RISK OF ELECTRIC SHOCK!

14.

Never

touch the power plug, the power switch, or other electrical

components with wet or damp hands. RISK OF ELECTRIC
SHOCK!

15. Do not place or store the SPL med close to a source of liquid,

such as a bathtub, a shower, or a washbasin. There is danger that
the 601 may meet splashed water. RISK OF ELECTRIC SHOCK!

WARNING!

To reduce risk of burns, electrocution, fire, or injury to persons:

1. Use only a properly secured safety socket with the appropriate

mains voltage. See technical data and rating plate.

The electric components must not encounter water

RISK OF ELECTRIC SHOCK!

3. Check all cables regularly and contact the customer service when

any cable is in improper condition. RISK OF ELECTRIC SHOCK!

4. Make sure that the power cable is not damaged when the treatment

table is moved. Do not step on the power cable. Do not stretch the
power cable.

5. Always ensure that the power cable is not bent or squeezed during

installation.

6. Do not use any extension cables, multiple sockets, or adapters.

FIRE HAZARD!

7. Never open the housing of the electrical control panels. RISK OF

ELECTRIC SHOCK!

8. No liquids may enter the electrical control panels. RISK OF

ELECTRIC SHOCK!

Summary of Contents for 601



















































































Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands

GHARiENi 601, Instruction Manual

Search results

Summary of Contents for 601

Reviews:

Related manuals for 601

Brands by name

Popular brands