background image

A

B

C

D

H

I

E

F

F

G

G

J

K

Part List

NOTICE

*Please make sure that you have all parts indicated and they are in good condi�on before you 

begin assembly of this item. Refer to part list and hardware list below for guidance.

*This item should be assembled on a so� surface to prevent scratching the finish during 

assembly.

*This item may require periodic �ghtening.

*If you are having difficulty, our friendly Customer Care team is always here to help. Please 

email 

[email protected] 

*Before beginning assembly of product, make sure all parts are present. Compare parts with

part contents list and hardware contents list.

*If any part is missing or damaged, do not a�empt to assemble the product.

*Es�mated Assembly Time: 60 minutes.

*Tools Required for Assembly (included): Allen Key

PREPARATION

CARE AND MAINTENANCE

Always use felt pads under all ar�cles to prevent discolorra�on or so�tening of the lacquer.

Plas�c and rubber bases on items can discolor wood. Wipe up spills immediately and avoid 

common hazards such as hot dishes, harsh solvents and abrasives. Cleaning should be done

with a so� lint free co�on cloth dampened with water or furniture polish. On highly used surfaces

we recommend applying a quality paste wax shich should be used on a reguler basis to provide

addi�onal protec�on from scratches and spills. How o�en you apply the wax depends on how 

much wear the furniture receives.

Model# MED9600
Product Dimensions: 46”Wx15”Dx19”H

This product is intended for use with a

FLAT SCREEN TV ONLY

Maximum Screen Size: 50 inches

Weight Limit: 63.8 Ibs

Shelf Load Limit: 22 Ibs

Drawer Load Limit: - Ibs

Use with heavier televisions may result

in instability causing tip over resulting in

death or Serious injury.

Death or serious injury may occur

when children climb on audio

and/or video equipment furniture.

A remote control or toys placed on

the furnishing may encourage a

child to climb on the furnishing and

as a result the furnishing may tip

over on the child.

Summary of Contents for MED9600








Reviews: