13-37N1P3 / 13-88N1P3
FAUTEUIL DE LUXE À DOSSIER À MAILLES
AÉRÉES (AIR GRID)
INSTRUCTIONS DE MONTAGE
© Office Star Products
Juillet
2010
13-37N1P3 / 13-88N1P3
DELUXE CHAIR W/ AIR GRID BACK
OPERATING INSTRUCTIONS
Enlever toutes les pièces du carton, les organiser selon les numéros de pièce indiqués sur la liste et vous assurer que les quantités
des pièces sont correctes.
ÉTAPE 1
Insérer les roulettes (2) dans la base (1), et vous assurer que toutes les roulettes (2) sont bien insérées.
ÉTAPE 2
Alignez les trous dans les accoudoirs (7L et 7R) avec les trous du coussin du dossier (6). Joignez les accoudoirs (7L et 7R) au
coussin du dossier (6) en utilisant deux vis d’accoudoir (8) pour chaque accoudoir.
SERREZ FORTEMENT TOUTES LES VIS EN PLACE À
L’AIDE DE LA CLÉ ALLEN (12).
ÉTAPE 3
Fixer le mécanisme (4) au coussin du siège (5) avec la flèche vers l’avant du siège. Fixer avec quatre vis de mécanique (9).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DE MÉCANIQUE (9) AVEC LA CLÉ ALLEN (12).
ÉTAPE 4
Fixer le support du dossier (11) à l’arrière de la plaque du siège (4) avec trois vis de support de dossier (10).
RESSERRER COMPLÈTEMENT TOUTES LES VIS DE SUPPORT DE DOSSIER (10) AVEC LA CLÉ ALLEN (12).
ÉTAPE 5
Insérer le vérin pneumatique (3) dans la base (1). Placer le siège assemblé sur le vérin pneumatique (3) et mettre de la pression.
ATTENTION : AVANT D’UTILISER LE FAUTEUIL, VOUS ASSURER D’AVOIR RESSERRÉ COMPLÈTEMENT TOUTES LES VIS.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and
knobs are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Do not overturn back tilt knob when decreasing
tension.
5. Dispose of packing material properly. Do not use
plastic cover as head covering. It may cause
suffocation.
6. Do not use chair as a stepladder.
7. Use this chair for its intended purpose only.
8. Use mild detergent only for cleaning.
LIMITED WARRANTY
SPACE® chairs are warranted* from the date of purchase against failure due to material and workmanship as follows:
• Lifetime on component parts including pneumatic cylinder, control mechanism, base and casters.
• 3 Years on upholstery fabric and foam against wear and deterioration.
*All warranties are limited to the original purchaser for normal commercial usage defined as a standard forty hour work week by
persons weighing 250 lbs. or less. This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration,
accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star Products. The warranty does not
cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded. The user
assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a five year warranty on
all parts applies. Fabric is warranted for one year. This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
To make a warranty claim, contact Parts Department via e-mail [email protected], by Fax 1-909-930-5629, or toll free parts
number 1-800-950-7262, Monday through Friday 8:00 a.m. - 5:00 p.m. Pacific Time. Provide model number and description of the
problem and obtain confirmation number. At it’s option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer’s component.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components
covered by warranty will be paid by Office Star Products.
FEATURES
• PNEUMATIC SEAT HEIGHT ADJUSTMENT
To raise seat height, remove pressure from seat and lift
lever (1) up. To lower seat height, sit on chair and
lift lever (1) up.
NOTE:
It is normal for chair to slightly lower under body weight.
• 2-TO-1 SYNCHRO TILT & TILT TENSION
ADJUSTMENT
For individual comfort, this chair has been equipped with an
adjustment that will allow the user to change the tension of the
tilting feature. Turn knob (2) clockwise to increase tension and
counter-clockwise to decrease or ease the tension. To
lock return chair to the upright position, push lever (1) in.
To unlock pull lever (1) out.
NOTE:
Be careful not to loosen tilt adjustment knob completely.
1
2
1
ÉTAPE
1
ÉTAPE
2
ÉTAPE
3
ÉTAPE
4
ÉTAPE
5
2
3
1
12
10
11
7L
8
12
12
9
4
4
5
6
7R
X5
X2
X4
6
X3
8
X2
PIÈCE
QTÉ
1. Base . . . . . . . . . . . . . . . . . . . . 1
2. Roulettes . . . . . . . . . . . . . . . . . 5
3. Vérin pneumatique . . . . . . . . . 1
4. Mécanisme . . . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . 1
6. Coussin du dossier . . . . . . . . . 1
7. Accoudoirs (7L et 7R) . . . . . . . 2
8. Vis d’accoudoir . . . . . . . . . . . . 4
9. Vis de mécanique . . . . . . . . . . 4
10. Vis de support de dossier . . . 3
11. Support de dossier
(préinstallé) . . . . . . . . . . . . . . . . . 1
12. Clé Allen . . . . . . . . . . . . . . . . 1
13-88N1P3 (not shown)
