Gestetner B147, Service Manual

Page: 46 / 1081

MACHINE INSTALLATION
B147/B149/B190 1-12 SM
1.4.2 MOVING MACHINE

CAUTION
Make sure that the transfer belt is in its correct position before moving the
machine, otherwise the transfer belt and the black PCU may be damaged.
This section assumes that you will manually move the machine from one floor to
another floor. When using any transport equipment, see section 1.4.3,
“Transporting Machine.”
The machine stands make it difficult to move the copier with an optional paper tray
or LCT installed. You can remove them as necessary.
1. Check that the transfer belt is in its
correct position.
2. Remove all trays from the optional
paper feed unit or LCT.
3. Remove the front stand [A]
(

x 2).
4. Remove the rear stand [B]
(

x 2, 2 brackets).
CAUTION: After moving the machine to it’s new location, reinstall the machine
stands. Without them, the machine may tip over when you pull out a
paper tray or while you work on the machine.
G080I910.WMF
G080I911.WMF
[A]
[B]