Gestetner B147, Service Manual

Page: 162 / 1081

TRANSFER AND PAPER TRANSPORT UNIT
B147B149/B190 3-48 SM
3.10 TRANSFER AND PAPER TRANSPORT UNIT
3.10.1 TRANSFER UNIT
NOTE: When removing or installing the transfer unit, grasp the central areas of the
front and rear frame. Do not touch the transfer belt [A]. Do not damage the
entrance mylar [B].
After replacing the transfer unit, reset the maintenance counter, SP7-804-16, and
conduct the output check, SP5-804-74.
1. Duplex feed unit ( 3.4.1)
2. Turn the release lever counterclockwise. ( 3.8)
3. Pull out the transfer unit [C] until the entire unit is visible (

x 2).
4. Grasp the transfer unit grips as shown above. Lift the unit to remove it.
NOTE: Grasp the front grip. Use caution not to damage the actuator on the rear.
After replacing the transfer unit:
• Perform forced line position adjustment (SP5-993-002 or

> Maintenance >
Color Registration).
• Print the 1-dot grid pattern on A3/11" x 17" paper and check the color shift level
(
4.6.3).
B146R958.WMF
[A]
[C]
[B]