Gestetner B147, Service Manual

Page: 1078 / 1081

Firmware History for B147/B149/B190
Page 12 of 15
12. SCANNER:
CARD VERSION PART NUMBER CHECK SUM PRODUCTION DATE
2.02 B6126520B 42C7 October 2003 production
2.03 B6126520C D7A6 December 2003 production
2.04 B6126520D FB6F February 2004 production
2.05 B6126520 5DCD December 2004 production
12.1 SCANNER FIRMWARE HISTORY:
SYMPTOM CORRECTED
CARD
VERSION
Initial Production Release
2.02
Corrects the following:
•
The Access Code dialogue box remains displayed after pushing the Scanner button on
the MFP if the Partial Access Code settings are not completed.
•
When a blank fax number is input for an advanced search using the LDAP search
function, information for the previous user will be displayed instead.
•
SP1-007-001 (Store Priority) returns to its default value of 1 (“Send Only”) following a
Scanner Document Server job using either a setting of 2 (“Store Only”) or 3 (“Send and
Store”).
•
The Destination field for a Scanner Document Server job is selectable even if SP1-007-
001 (Store Priority) has been set to 2 (“Store Only”), when: The setting of 2 is input
→
Scanner main screen is accessed
→
Main power is turned Off/On.
•
The following errors occur when printing out the Scanner UP from SP5-990-23:
- The default and current values for “Original Feed Type Priority” do not appear
on the printout.
- The default and current values for “Exposure Glass” and “SADF” (under Wait
Time for Next Originals) are displayed incorrectly.
2.03
Corrects the following:
•
VRAM memory-full error after multiple Scanner transmission jobs.
•
Network PC stations registered under a given workgroup are not displayed when the
workgroup name consists only of numerical characters (SMB transmission Network
screen).
2.04
Corrects the following:
•
Default value for SP2-022-007 (Adjustment value of threshold) was changed from
-80
→
-110.
Reason: To improve the B/W image quality with the Scanner ACS feature.
NOTE: - To enable this change, set SP2-022-007 to its new default of –110.
- Also install System firmware v1.21 or newer.
2.05
⇒
⇒