Gestetner B147, Service Manual

Page: 346 / 1081

COPY SERVICE MODE
B147/B149/B190 5-58 SM
5-913 Switchover Permission Time *CTL [3~30 / 3 / 1 s]
Sets the amount of time to elapse while the machine is in standby mode (and the
operation panel keys have not been used) before another application can gain control
of the display.
Large Capacity Exit Mode *CTL 0: OFF, 1: ON 5-961
Selects whether or not all stapled copies are sent to Shift Tray 1 when the Two-Tray
finisher is installed.
5-967 Copy Server Set Function *CTL 0 : ON, 1: OFF
Enables and disables the document server. This is a security measure that prevents
image data from being left in the temporary area of the HDD. After changing this
setting, you must switch the main switch off and on to enable the new setting.
[Cherry Server] 5-974
Specifies which version of ScanRouter, “Lite” or “Full”, is installed.
5-974-1 Cherry Server Setting *CTL [ 0 or 1 / 0 / - ]
0: Lite
1: Full
[Loop Back Test] 5-989
Executes a communication test with peripherals by using a special tool (connector)
which is unique for each peripheral.
The machine checks if the communication with the peripherals is OK or NG; then
displays the result.
DFU
5-989-1 Duplex
5-989-3 Finisher
5-989-4 PSU
5-989-5 ADF
[SP print mode] 5-990
Prints out the SMC sheets.
5-990-1 All (Data List)
5-990-2 SP (Mode Data List)
5-990-3 User Program
5-990-4 Logging Data
5-990-5 Diagnostic Report
5-990-6 Non-Default
5-990-7 NIB Summary
5-990-8 Net File Log
5-990-21 Copier User Program
5-990-22 Scanner SP
5-990-23 Scanner User Program