Gestetner B147, Service Manual

Page: 848 / 1081

BIT SWITCHES
B603 54 SM
Communication Switch 0B SP No. 1-104-012
No FUNCTION COMMENTS
0 Use of Economy Transmission
during a Transfer operation to
end receivers
0: Disabled 1: Enabled
These bits determine whether the machine uses the
Economy Transmission feature when it is carrying
out a Transfer operation as a Transfer Station.
1 Use of Economy Transmission
during a Transfer operation to
the Next Transfer Stations
0: Disabled 1: Enabled
2 Use of Label Insertion for the
End Receivers in a Transfer
operation
0: Disabled 1: Enabled
This bit determines whether the machine uses the
Label Insertion feature when it is carrying out a
Transfer operation as a Transfer Station.
3 Conditions required for
Transfer Result Report
transmission
0: Always transmitted
1: Only transmitted if there was
an error
0: When acting as a Transfer Station, the machine
will always send a Transfer Result Report back to
the Requesting Station after completing the Transfer
Request, even if there were no problems.
1: The machine will only send back a Transfer
Result Report if there were errors during
communication, meaning one or more of the End
Receivers could not be contacted.
4 Printout of the message when
acting as a Transfer Station
0: Disabled 1: Enabled
When the machine is acting as a Transfer Station,
this bit determines whether the machine prints the
fax message coming in from the Requesting
Terminal.
5 Action when there is no fax
number in the programmed
Quick/Speed dials which meets
the requesting terminal’s own
fax number
0: Transfer is disabled
1: Transfer is enabled
After the machine receives a transfer request, the
machine compares the last N digits of the
requesting terminal’s own fax number with all the
Quick/Speed dials programmed in the machine. (N
is the number programmed in communication switch
0C.)
0: If there is no matching number programmed in
the machine, the machine rejects the transfer
request.
1: Even if there is no matching number programmed
in the machine, the machine accepts the transfer
request. The result report will be printed at the
transfer terminal, but will not be sent back to the
requesting terminal.
6-7 Not used Do not change the settings.