Gestetner B147, Service Manual

Page: 445 / 1081

SD CARD APPLI MOVE
SM 5-157 B147/B149/B190
Service
Tables
5.7 SD CARD APPLI MOVE
5.7.1 OVERVIEW
The service program “SD Card Appli Move” (SP5-873) enables you to copy
application programs from an SD card to another SD card.
The machine has three SD card slots. It can use two of them–Slot 1 and Slot 2–as
the storage of application programs. Slot 3 is for maintenance work only. You
cannot use three SD cards at the same time as the application program storage. If
your application programs are in three or more SD cards, choose one or two SD
cards from them, and save all the application programs into the SD card(s).
Extreme caution should be exercised when using SD Card Appli Move:
1. The data necessary for authentication is transferred with the application
program from an SD card to another SD card. Authentication fails if you try to
use the SD card after you copy the application program from the card to
another card.
2. Do not use the SD card if it has been used by the user on the computer.
Normal operation is not guaranteed when such SD card is used.
3. Keep the SD card in a safe place after you copy the application program from
the card to another card. This is because:

The SD card can be the only proof
that the user is licensed to use the application program.

You may need to
check the SD card and its data to solve a problem in the future.
4. You cannot copy PostScript data to another SD card. You have to copy another
data to the SD card that stores PostScript data.