GeoVision GV-FE3402 User Manual Download Page 3

Page: 3 / 228

Preface

Welcome to the

GV-Fisheye IP Camera User’s Manual

The GV-Fisheye IP Camera has the following models with different resolutions. This Manual

is designed for the following models and firmware versions:

Model

Model Number

Firmware Version

GV-FE2301

GV-FE4301

V3.12

GV-FE3402 / 3403

V3.12

GV-FE5302 / 5303

V3.12

Fisheye Camera

GV-UNFE2502 V3.12

GV-FER3402 / 3403

V3.12

GV-EFER3700 Series

V1.08

GV-FER5302 / 5303

V3.12

GV-FER5700 V1.06

Fisheye Rugged Camera

GV-FER12203 V1.02

IR Fisheye Camera

GV-UNFE2503

V3.12

Note:

1. To upgrade the camera firmware from V2.07 or earlier to the latest version, back up the

files in the camera’s memory card first before the upgrade and it is required to re-format
the memory card after the upgrade.

2. Starting from V3.0, GV-Fisheye IP Camera (except GV-FER5700 / 12203 and

GV-EFER3700 Series) supports recording to NAS devices using the Network
Neighborhood settings.

Summary of Contents for GV-FE3402





































































































































































































































Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands

GeoVision GV-FE3402, User Manual

Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands