Administrator Mode
4
1.
Activate Link:
Enable the connection to the GV-Video Gateway / GV-Recording
Server.
2.
Host Name or IP Address:
Type the host name or IP address of the GV-Video
Gateway / GV-Recording Server.
3.
Port Number:
Match the communication port on the GV-Video Gateway / GV-
Recording Server or keep the default value 50000.
4.
User Name:
Type a valid user name to log into the GV-Video Gateway / GV-
Recording Server.
5.
Password:
Type a valid password to log into the GV-Video Gateway / GV-Recording
Server.
6.
Enable schedule mode:
Enable the GV-Video Gateway / GV-Recording Server
connection on the schedule you set in the
Select Schedule Time
section. Refer to
4.5
Recording Schedule
for the same settings.
7. Click
Apply
.
The Connection Status should display “Connected” and the connected
time.
8. To establish the connection to the second GV-Video Gateway / GV-Recording Server,
click the
Connection 2
tab and repeat the above steps for setup.
127
Summary of Contents for GV-FE3402
