GeoVision GV-FE3402 User Manual Download Page 66

Page: 66 / 228

Introduction

1.7.2 GV-FE3402 / 3403 / 5302 / 5303

Figure 1-61

1. Remove the camer

he supplied torx wrench.

owing methods:

Power adapter:

plug in the power adapter and connect a standard network work

cable.

Power over Ethernet (PoE):

connect the camera to a PoE switch with a standard

network cable to su

nd network.

PoE Converter:

this method is only applicable to indoor GV-Fisheye Camera

installed with an IR LED ring (GV-FE3403 / 5303). A PoE converter allows the

supplies power to IR LED ring. For installation

5303

3. Optionally insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).

4. Optionally connect an external speaker.

5. Optionally connect a GV-WiFi Adapter (for WiFi accessibility) or an external USB hard

drive (for additional storage).

6. Secure the camera cover with the supplied torx wrench.

Note:

For details on the limitations and requirements of mini USB port, refer to

Note for

USB Storage and WiFi Adapter

at the beginning of this manual.

a cover with t

2. Supply power and network to the camera with one of the foll

pply power a

camera to be connected to a PoE switch (thus supplied with network and power
over a network cable), and also
steps, see

1.7.4 Connecting PoE Converter and IR LED Ring for GV-FE3403 /

Summary of Contents for GV-FE3402





































































































































































































































Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands

GeoVision GV-FE3402, User Manual

Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands