GeoVision GV-FE3402 User Manual Download Page 148

Page: 148 / 228

Administrator Mode

4.5 Recording Schedule

The schedule is provided to activate recording and I/O monitoring on a specific time each
day.

4.5.1 Recording Schedule Settings

You can set up the schedule for recording.

Figure 4-22



Span 1- Span 3:

Set a different recording mode for each time span during the day.

Each day can be divided into 3 time spans, shown as Span 1, Span 2, and Span 3.
The time span settings will apply to Monday through Sunday.



Weekend:

Enable this option to start monitoring all day on the weekend and select a

recording mode to be used. Define whether your weekend includes

Saturday and

Sunday

Only Sunday



Special Day:

Set the recording mode on a specified day.

133

Summary of Contents for GV-FE3402





































































































































































































































Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands

GeoVision GV-FE3402, User Manual

Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands