Administrator Mode
4
[Region of Interest]
Defines clarity of different parts of the live view for the camera connecting to third-party
software through ONVIF/RTSP. This function is disabled by default. Select
Enable
and click
ROI Setting
to configure:
1. On the popup window, use your mouse and draw directly on the live view to specify a
region.
Figure 4-3
2. To define clarity to the region, select
ROI
and select
High
,
Medium
or
Low
using the
drop-down list.
3. Click
Apply
to apply the configurations.
[GOP Structure and Length]
Use the
Group of Picture (GOP) Size
drop-down list to set the number of seconds between
every key frame. This option is only available when H.264 is selected for codec.
[H.264 Video Entropy Coding Setting]
By default, the entropy coding is set to
CAVLC
. To change it to
CABAC
, click and select
from the drop-down list. This function is not available for GV-FER5700 / 12203 / EFER3700 /
EFER3700-W.
[Record Settings]
Note for
GV-FER5700 / 12203 / EFER3700 / EFER3700-W
firmware
V1.02 or later, see Recording Settings in
4.4 Monitoring
to adjust the setting.
The alarm settings allow you to capture images before and/or after the motion or I/O event
happens.
Pre-alarm recording time:
Activates video recording before an event occurs. Set the
recording time to 1 or 2 seconds. The recording is saved in the buffer of the camera.
103
Summary of Contents for GV-FE3402
