GeoVision GV-FE3402 User Manual Download Page 149

Page: 149 / 228

4.5.2 I/O Monitoring Settings

You can set the schedule for I/O monitoring to start.

Note:

The I/O Monitoring Settings are only supported for GV-FE2301 / 4301, GV-

FER5700 / 12203 and GV-EFER3700 / EFER3700-W.

Figure 4-23



Span 1-3:

Set different time spans during the day to enable I/O monitoring. Each day

can be divided into 3 time spans, shown as Span 1, Span 2, and Span 3. The time
span settings will work from Monday through Sunday.



Weekend:

Enable this option to start I/O monitoring all day on the weekend and select

whether your weekend includes

Saturday and Sunday

Only Sunday



Special Day:

Enable I/O monitoring on a specified day.

Note:

In Recording Schedule and I/O Monitoring Schedule, if the settings for Special

Day conflict with those for Span 1-3 or Weekend, the Special Day settings will get
priority.

134

Summary of Contents for GV-FE3402





































































































































































































































Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands

GeoVision GV-FE3402, User Manual

Search results

Summary of Contents for GV-FE3402

Reviews:

Related manuals for GV-FE3402

Brands by name

Popular brands