Administrator Mode
4
2. Drag an area on the image. Click
Add
when you are prompted to confirm the setting.
3. To create several areas with different sensitivity values, repeat Steps 2 and 3.
4. Click
Save
to save the above settings.
5. Under Motion Detection section, select the following options to reduce false alarm.
Ignore environmental changes:
Ignore environmental changes in the camera
view such as rain or snow.
The
Noise Tolerance
function is enabled by default. It
ignores video noise when
the light intensity changes.
Set Time Interval:
If you set a time interval, the duration of motion has to exceed
the time interval for motion detection to be triggered.
Set Duration:
Set a period of time for a motion to be recorded even if it lasts
shorter than the specified time.
6. To trigger the alarm output when motion is detected, select
Output1
and click the
Apply
button. To activate the output settings, you must also start
Input
monitoring manually or
by schedule. For related settings, see
4.4 Monitoring
.
Note:
1. The I/O settings are only available for GV-FE2301 / 4301, GV-FER5700 / 12203 and
GV-EFER3700 / EFER3700-W.
2.
Set duration
is only supported by GV-FER5700 / 12203 / EFER3700 / EFER3700-W
firmware V1.02 or later.
107
Summary of Contents for GV-FE3402
