Geneko GWG, User Manual

Page: 83 / 158

83
User Manual
GWG Gateway
Maintenance – Date/Time Settings
To set the local time, select Date/Time Settings using the Network Time Protocol (NTP)
automatically or Set the local time manually. Date and time settings on the GWG Gateway are done through
window Date/Time Settings.
Figure
55
– Date/Time Settings configuration page
Date/Time Settings
Label Description
Manually Sets date and time manually as you specify it.
From time server Sets the local time using the Network Time Protocol (NTP) automatically.
Time/Date
This field species Date and Time information. You can change date and time by
changing parameters.
Time Protocol Specify time protocol. Currently only NTP is supported.
Time Server Address Enter the Hostname or IP address of the NTP server.
Automatically
synchronize NTP
Setup automatic synchronization with time server.
Update time every Time interval for automatic synchronization.
Time Zone
Enables daylight saving time and GMT offset based on TZ database.
Sync Clock Synchronize Date and time setting with PC calendar.
Save Click Save button to save your changes back to the GWG Gateway.
Reload Click Reload to discard any changes and reload previous settings.
Table
30
– Date/time parameters