59
User
Manual
GWG Gateway
Settings – PPTP
The Geneko Router can be used as a PPTP (Point-to-Point Tunneling Protocol) client. PPTP enables
the secure transfer of data from a remote computer to a private server by creating a VPN connection across
IP-based data networks. PPTP uses a control channel over TCP and a GRE tunnel operating to encapsulate
PPP packets.
Figure
30
–PPTP configuration page
PPTP
Label
Description
Number
Selected tunnel number. Number of PPTP tunnels is limited to 5.
Enabled
Select this option to enable tunnel.
Tunnel name
Unique tunnel identifier.
PPTP server IP
address or
hostname
IPv4 address of remote PPTP server.
Remote Netmask
Netmask of remote subnet to route.
Domain
Some PPTP servers require domain name of authentication.
Username
Username to authenticate to the remote server.
Password
Password to authenticate to the remote server.
Encryption
Leave this option enabled to use default MPPE (Microsoft encryption) and MPPC
(Microsoft compression) protocols.
Persist
If this option enabled to use default MPPE (Microsoft encryption) and MPPC
(Microsoft compression) protocols.
Maxfail
Max number of retries to reconnect. 0 for infinite retries.
Debug
Enable extra information in system log.
Edit
Click
Edit
to edit selected tunnel from the table.
Delete
Click
Delete
to delete selected tunnel from table.
Reload
Click
Reload
to discard any changes and reload previous settings.
Save
Click
Save
to create new, or save changes to existing tunnel.
Table
15
- PPTP Parameters
Summary of Contents for GWG
Page 1: ...GWG Gateway USER MANUAL GWG Document version 1 0 1 Date July 2016 WWW GENEKO RS ...
Page 43: ...43 User Manual GWG Gateway Figure 22 RIP configuration page ...
Page 136: ...136 User Manual GWG Gateway Click OK Figure 125 Policies from trust to untrust zone ...
Page 156: ...156 User Manual GWG Gateway Figure 150 Configuration page for SIM keepalive ...