Geneko GWG, User Manual

Page: 51 / 158

51
User Manual
GWG Gateway
Figure
26
– IPSec Settings
VPN Settings / IPSec Settings
Label Description
Tunnel Number
This number will be generated automatically and it represents the tunnel number.
Tunnel Name
Enter a name for the IPSec tunnel. This allows you to identify multiple tunnels and
does not have to match the name used at the other end of the tunnel.
Enable
Check this box to enable the IPSec tunnel.
Local Security gateway
type
Select the type you want to use: IP Only, SIM card. IP Only - Only a specific IP
address will be able to establish a tunnel. NOTE: The Local Security Gateway Type
you select should match the Remote Security Gateway Type selected on the IPSec
device at the other end of the tunnel.
IP Address
The WAN (or Internet) IP address of the GWG Gateway automatically appears. If
the GWG Gateway is not yet connected to the GSM/UMTS/LTE network this field
will be blank.
Local ID type
Authentication identity for one of the participant. It can be an IP address or a fully-
qualified domain name preceded by @. When using certificates, this field must be
filled with information from the certificate CN= field (for example FQDN is
@vpn.something.com and user FQDN is someone@something.com if that's what's
written in the certificate files).
Local Security Group
Type
Define if only the computer with a specific IP address or whole subnet will be able
to access the tunnel.
IP Address Select the local LAN user(s) behind the Geneko Router that can use this IPSec