Gefen GEF-UHD-89-HBT2 User Manual Download Page 98

Page: 98 / 232

page | 86

asic Oper

ation

Locking the Matrix

Locking the matrix disables the front-panel controls, IR routing, and the built-in web

interface. This is useful in preventing an accidental change to matrix settings by

inadvertently pressing any of the front-panel buttons.

1. Click the

Routing

tab.

2. Click the

Lock

button near the top of the screen.

3. Once pressed, the

Lock

button will read “Unlock”. The Lock button on the front panel

will also glow bright blue. The matrix is now locked.

4. Click the

Unlock

button to unlock the matrix.

5. The

Unlock

button will now read “Lock”. The

Lock

button on the front panel will also

turn-off. The matrix is now unlocked.

The Web Interface

Information

Locking the Matrix Controller will also disable routing and other operations

within the Web Interface.

asic Oper

ation

Summary of Contents for GEF-UHD-89-HBT2









































































































































































































































Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands

Gefen GEF-UHD-89-HBT2, User Manual

Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands