Gefen GEF-UHD-89-HBT2 User Manual Download Page 59

Page: 59 / 232

page | 47

asic Oper

ation

asic Oper

ation

Menu System

7. Press the

Enter

button on the front panel or on the IR remote control to display the

input control screen.

8. Press and release the

▲

▼

buttons on the front panel or on the included IR

remote control, to select the desired input or output. These buttons will glow blue

when they are pressed on the front panel.

9. Press the

Enter

button on the front panel. If using the included IR remote control,

press the

button.

If an input (1 - 8) is selected, then the following options will be available:

►

2.2 and below

Only HDCP version 2.2 and below is allowed to be sent from the source device.

►

1.4 and below

Only HDCP version 1.4 and below is allowed to be sent from the source device.

►

Reject

Blocks HDCP content from being sent from the source device.

If an output (A - H) is selected, then the following options will be available:

►

Follow Input

HDCP pass-through: The content on the output of the matrix matches the

content provided by the source device.

►

Always Encode

Always applies HDCP encryption to the content on the output of the matrix.

So, even if the source is not HDCP, the output will be HDCP.

10. Once the desired input or output is selected, press the

Enter

button on the front

panel or the

button on the IR remote control. The arrow cursor will appear next

to the current selection for the input (or output).

hdcp control: input

input 03: 2.2

input 03

)2.2 and below

hdcp control: input

input 01: 2.2

Summary of Contents for GEF-UHD-89-HBT2









































































































































































































































Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands

Gefen GEF-UHD-89-HBT2, User Manual

Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands