Gefen GEF-UHD-89-HBT2, User Manual

Page: 32 / 232

page | 20
When the matrix is shipped from the factory, the matrix is set to “one-to-one” routing
mode. This means that Input 1 is routed to Output A, Input 2 is routed to Output B,
Input 3 is routed to Output C, and so on. To change the routing state for any output,
follow the instructions below.
Using the Front Panel
1. Go to the routing screen . If the routing screen is not displayed, then press and
release the Back button until the routing screen is displayed.
2. Select the desired output by pressing and releasing the ▲ or ▼ buttons.
These buttons will glow blue when they are pressed.
For example, if we have an 4K Ultra HD source connected to
In 4
(Input 4)
and we want to view the source on the 4K Ultra HD display that is connected
to Out G (Output G).
The first thing we need to do is use the ▲ or ▼ buttons until Output G is
displayed. Currently, Input 7 is routed to Output G. We need to change it to
Input 4.
3. Press the Enter button.
4. An arrow cursor will be displayed next to the input. This indicates that input
can now be changed.
B
asic Oper
ation
B
asic Oper
ation
out G :output G
A/V In:input 07
out B :output B
A/V In:input 02
out G :output G
)A/V In:input 07
Ethernet
IP Control
IR In/Ext IR All
Out
RS-232 IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
IR Out
IR In
RS-232
In
Local Out
HDMI
1 2 3 4 5 6 7 8
A B C D E F G H
GEF-UHD-89-HBT2
*Preferred
4K Ultra HD
HDBaseT
w/ HDCP 2.2, POH, Ethernet,
RS-232 & 2-way IR
Receiver ™
RS-232
Ethernet
HDMI
Out
IR
In/Ext
IR
Out
Pwr HDBaseT™
POH Input
®
4K Ultra HD 8x9 Matrix for HDMI
w/ HDCP 2.2, HDBaseT™ & POH
Back
Enter
IR Power
Menu Preset
Lock
*Preferred
®
HDMI Inputs
HDBaseT™ POH Outputs
out a :output a
A/V In:input 01
Routing Inputs to Outputs
B
asic Oper
ation
B
asic Oper
ation