Gefen GEF-UHD-89-HBT2 User Manual Download Page 86

Page: 86 / 232

page | 74

asic Oper

ation

asic Oper

ation

Menu System

7. Press the

Enter

button on the front panel or the

button on the IR remote

control to change the current IR channel. The cursor will appear next to the

current IR channel.

8. Press and release the

▲

▼

buttons on the front panel or on the IR remote control,

to select the desired IR channel. The IR channel range is 1 - 4.

9. Press the

Enter

button on the front panel or the

button on the IR remote control

to save the change.

10. Reboot the matrix to affect changes.

IR CHANNEL:

ir channel:

asic Oper

ation

asic Oper

ation

Summary of Contents for GEF-UHD-89-HBT2









































































































































































































































Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands

Gefen GEF-UHD-89-HBT2, User Manual

Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands