Gefen GEF-UHD-89-HBT2 User Manual Download Page 65

Page: 65 / 232

page | 53

asic Oper

ation

asic Oper

ation

Menu System

►

Setting the IP Mode

a. From the

IP Mode

screen, press the

Enter

button on the front panel or the

button on the IR remote control. An arrow cursor will be displayed next to the

current IP mode, indicating that it can be changed:

b. Press and release the

▲

▼

buttons on the front panel or on the IR remote

control, to select the desired IP Mode.

►

Static mode

Allows custom configuration of the IP address, subnet mask, and gateway.

►

DHCP mode

The IP address, subnet mask, and gateway address are automatically

assigned by a DHCP server.

c. Press the

Enter

button on the front panel or the

button on the IR remote

control to save the change.

d. Reboot the matrix to affect changes.

►

Setting the IP Address

a. From the

IP Mode

screen, press and release the

▲

▼

buttons on the front

panel or on the IR remote control, to select the

IP Address

option.

The current IP address will be displayed.

b. Press the

Enter

button on the front panel or the

button on the IR remote

control to edit the IP address.

c. The cursor will appear under the first digit of the IP address.

ip address

192.168.001.072

ip mode:

)Static

ip address

192.168.001.072

Important

The IP address can only be changed if the IP Mode is set to Static.

Summary of Contents for GEF-UHD-89-HBT2









































































































































































































































Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands

Gefen GEF-UHD-89-HBT2, User Manual

Search results

Summary of Contents for GEF-UHD-89-HBT2

Reviews:

Related manuals for GEF-UHD-89-HBT2

Brands by name

Popular brands