Assembly
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
52 / 90
BL068 GB Edition 03/2015
5.3.2.4
Pivot arm 300 kg [660 lb] for the GEDA MAXI 150 S
The hook block 300 kg [660 lb] Item No. 01273 is installed on the pivot
arm 300 kg [660 lb] Item No. 01272.
Attach the pivot arm 300 kg
[660 lb] (7) (with adjustable at-
tachment at the top) to the verti-
cal pipe (4) so that it points out-
wards from the scaffolding.
The attachment of the upper pivot
arm 300 kg [660 lb] is adjustable,
thus, it can be adjusted in height in
order to be able to swing inward the
upper rope pulley (7a) below the
above scaffolding level.
It must be ensured that both fasteners of the pivot arm mounting
are fastened as closely as possible to the intersections of the scaf-
folding.
The vertical frame (4), on which the pivot arm 300 kg [660 lb] is
suspended, must be anchored above and below to the building
(tensile and compression proof anchor) and additionally secured
with cross stays.
Anchoring forces = minimum 2.5 kN [0.56 kip]
Swivelling the pivot arm
Press down the locking device
(7a) and swivel the pivot arm.
4
7
7a
7a
