Assembly
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
48 / 90
BL068 GB Edition 03/2015
5.3
Assembling scaffolding lift
The machine must only be installed and deployed vertically!
The pivot arm is suspended on the upper end of the same vertical pipe
as the winch.
5.3.1
Installing the winch
The scaffolding lifts
GEDA MINI 60 S
, as well as
GEDA MAXI 120 S
and
GEDA MAXI 150 S
are specifically designed for 1½
″ pipe scaffold-
ing.
If you should use scaffolding with other dimension, please contact
your dealer or the manufacturer, who can offer you an adapter or
special design.
Use the welded pipe clamps and loosely in-
stall the winch (1) on the vertical frame (2)
of the scaffolding.
Align so that the rope drum is parallel to the
scaffolding.
Fully tighten the pipe bolts.
Tightening torque
50 Nm [37 lbf ft],
width across flats (AF) 22 mm
The vertical frame (2) of the scaffolding on which the scaffolding
lift is installed, must be aligned vertically.
1
2
