Dismantling (disassembly)
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
62 / 90
BL068 GB Edition 03/2015
6.3
Emergency shutdown
In situations that present a risk to operating personnel or the scaffolding
lift, movement can be shut down by pressing an
EMERGENCY STOP
button.
There is an
EMERGENCY STOP
button on
the manual control
EMERGENCY STOP slam buttons are equipped with a latching
mechanism and remain active until they are manually unlocked
again (turn red button to the right and pull it out).
6.4
Interrupting work – end of work
Move the load down and place on the ground.
Remove the manual control and keep under lock and key.
Disconnect the mains plug.
7
Dismantling (disassembly)
For disassembly, the same regulations and safety instructions are
applicable as described in Chapter 5.
Disassembly is generally carried out in reverse order to installation; in
addition, also observe:
•
Cordon off danger zone and attach warning notices.
•
First remove fall protection and close the three-part side protection of
the scaffolding.
