Assembly
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
56 / 90
BL068 GB Edition 03/2015
5.4
Securing loading and unloading points
To prevent persons falling, fall protection must be installed at
all
loading
and unloading points where there is a risk of falling from a height of
more than 2 m [6.5 ft].
(Refer to national provisions)
Landing-level safety gate “ECO S”
Item No. 42500
Width: 0.85 m [2.8 ft]
Weight: 22 kg [48 lb]
Aperture for rope: max. 0.15 m
[0.5 ft]
1 = Landing level safety gate
2 = Railing rope hoists
To adapt the aperture to the wire rope swivelled in, the railing of
the rope hoists (2) can be installed in two positions.
Assembly
Put landing level safety gate (1) on scaffolding.
Align so that the swivelled in rope is guided through the aperture of
the “railing rope hoists” (2).
Attach the landing-
level safety gate to the
scaffolding using suit-
able attachment de-
vices (e.g. cross-
couplings / parallel
couplings).
For large scaffold section widths, it may also be necessary to install
a horizontal scaffolding pipe (3) to attach the gate.
1
2
max. 0.15 m
2
1
3
2
