Assembly
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
50 / 90
BL068 GB Edition 03/2015
5.3.2.2
Use with pivot arm mounting
The pivot arm mounting serves for fastening the pivot arm between
scaffolding levels.
Attach the pivot arm mounting (5)
for the
MINI 60 S
(with adjustable
attachment at the top) to the ver-
tical pipe (3) so that it points out-
wards from the scaffolding.
Place the pivot arm (3) and se-
cure by fully tightening the star
handle (3a).
The upper fastener of the pivot arm
mounting is adjustable so that it can
be adjusted in height in order to be
able to swing inward the pivot arm
(3) within the above scaffolding lev-
el.
It must be ensured that both fasteners of the pivot arm mounting
are fastened as closely as possible to the intersections of the scaf-
folding.
The vertical frame (4), on which the pivot arm mounting with pivot
arm is suspended, must be anchored above and below to the
building (tensile and compression proof anchor) and additionally
secured with cross stays.
Anchoring forces = minimum 1.0 kN [0.22 kip]
CAUTION
The pivot arm mounting Art.-No. 1407 (also refer to the type plate on
the pivot arm mounting) must only be used for the MINI 60 S.
3
4
3a
5
