General safety information
GEDA
®
MINI 60 S / MAXI 120 S / MAXI 150 S
Assembly and Operating Manual
16 / 90
BL068 GB Edition 03/2015
2.5
Safety instructions for servicing, maintenance and trou-
bleshooting
Operating personnel
must be
informed
about how to carry out special
work and maintenance work before they start.
Deadlines
that are stipulated or stated in the operating manual for re-
curring
tests / inspections
must be adhered to.
The
maintenance area
must be
cordoned off
as extensively as re-
quired!
Fundamentally, before any maintenance work on the machine
−
unload,
−
disconnect the mains plug.
All
servicing and maintenance tasks are only permitted when the
mains plug is disconnected
. Manual intervention while the machine is
running can lead to serious injury and is therefore prohibited. If it is
necessary to
turn the machine on during
such work, then this must
only be done while complying with
special safety measures
.
For further instructions about maintenance / maintenance inter-
vals / servicing, refer to the Chapter Maintenance.
If the machine has been completely shut down for these tasks, it must
be secured against switching on unintentionally:
•
Activate the
EMERGENCY STOP
button,
•
Place a warning sign
at the mains plug.
Any faults that could impair safety must be rectified immediately.
Workshop equipment
that is suitable for the specific work is impera-
tive for carrying out
servicing and maintenance tasks
. When carrying
out maintenance tasks at greater height, a fall-protection device must
be worn! Keep all handles, railings and the scaffolding from dirt and
contamination.
