GEA ECOVENT, Operating Instructions Manual

Page: 81 / 128

5. For optional version with proximity
switch holder (C):
5.1 Screw the mounting for the
proximity switch (C) into the ac-
tuator using the jaw wrench on
the wrench flat surface (C3).
5.2 Screw the switch bar (139) into
the mounting for proximity
switch (C) on the wrench flat
surface (139.1) using a jaw
wrench (a/f 17).
®
Observe torques, see table ‘Tighten-
ing torques’. 9.6.1 Tightening tor-
ques .
C2
C
C1 139
139.1
C3
6. Press the bearing (2) into the lantern
(9).
7. Place the seal disk (3) with the O-ring
(5) and seal ring (1) into the housing.
8. Place the lantern (9) onto the housing
and mount the hinged clamp (43) be-
tween the housing and the lantern.
®
Observe torques, see table ‘Tight-
ening torques’.
9.6.1 Tightening
torques
.
9. Place the seat ring (33) with the O-
ring (5) into the housing.
10. Screw valve disk (15) with the V-ring
(7) into actuator and tighten using
jaw wrench at wrench flat surface
(15.1). To do this, affix with a belt
wrench.
®
Observe torques, see table ‘Tight-
ening torques’.
9.6.1 Tightening
torques
.
9
2
3
43
1
5
15
7
7
33
5
5
15.1
Þ
The valve insert is assembled from individual parts.
9.6 Installing the valve - 81 / 128