manualshive.com logo in svg

GE XMO2, User Manual, Page: 141 / 196

Share
Download
GE XMO2 User Manual Download Page 141

September 2007

7-26

Advanced Programming

TERMINAL Option (cont.)

•

The 

mmHg Value Underrange Error

 is generated if the pressure 

reading (in the selected units) falls below the normal range.

•

The 

mmHg Value Overrange Error

 is generated if the pressure 

reading (in the selected units) exceeds the normal range.

•

The 

%N2 Value Underrange Error

 is generated when the %N2 (or 

any other selected background gas) value falls below 0.00%.

ENABLE/DISABLE ERRORS

Press 

[N]

 to skip this error, or 

press 

[Y]

 or 

[Enter]

 to set it.

mmHg value underrange?

mmHg value underrange response:

Press 

[N]

 to select the desired 

option, then press 

[Y]

 or 

[Enter]

 to 

confirm your selection and move 
to the next prompt.

disable    [ENABLE]

ENABLE/DISABLE ERRORS

Press 

[N]

 to move on to the next 

error.

mmHg value underrange?

ENABLE/DISABLE ERRORS

Press 

[N]

 to skip this error, or 

press 

[Y]

 or 

[Enter]

 to set it.

mmHg value overrange?

mmHg value overrange response:

Press 

[N]

 to select the desired 

option, then press 

[Y]

 or 

[Enter]

 to 

confirm your selection and move 
to the next prompt.

disable    [ENABLE]

ENABLE/DISABLE ERRORS

Press 

[N]

 to move on to the next 

error.

mmHg value overrange?

ENABLE/DISABLE ERRORS

Press 

[N]

 to skip this error, or 

press 

[Y]

 or 

[Enter]

 to set it.

%N2 value underrange?

%N2 value underrange response:

Press 

[N]

 to select the desired 

option, then press 

[Y]

 or 

[Enter]

 to 

confirm your selection and move 
to the next prompt.

disable    [ENABLE]

ENABLE/DISABLE ERRORS

Press 

[N]

 to move on to the next 

error.

%N2 value underrange?

Summary of Contents for XMO2





































































































































































































Reviews:

No comments