GE XMO2, User Manual

Page: 134 / 196

Advanced Programming 7-19
September 2007
DRIFTCAL HANDLER
Option (cont.)
The Set Max Drift/Cal option (cont.):
You may now do one of the following:
•
Press [N] as many times as necessary to select another DriftCal
Handler menu option. Then, press
[Y]
and proceed to the
appropriate section of this chapter for instructions.
•
Press [N] until you reach the Done? option of the DriftCal Handler
menu, then press [Y] to return to the Calibrate System menu.
The Done option:
The Done? option returns the XMO2 to the Calibrate System menu
from the DriftCal Handler? submenu. To use this option, refer to the
menu map in Figure C-8 on page C-8 and press [N] until the following
prompt appears.
You may now do one of the following:
•
Press
[N]
as many times as necessary to select another desired
DriftCal Handler? option. Then, press [Y] and proceed to the
appropriate section for instructions.
•
Press
[Y]
to leave the DriftCal Handler? submenu and return to the
top level of the Calibrate System menu.
Max % Drift per Cal:
To accept the current value, press
[Y]
or
[Enter]
. To change the
current value, use the numeric
keys to enter a new value and
press
[Y] or [Enter] twice.
%F.S. [xx]
DRIFTCAL MENU
Press
[N]
until this prompt
appears, then press [Y] or [Enter] .
Set Max Drift/Cal?
DRIFTCAL MENU
Respond as indicated below.
Done?