GE Vivid i, User Manual

Page: 208 / 388

Archiving
198
Vivid i User’s Manual
2378958-100 Rev. 02
A scanner and a DICOM server in a
network
In this scenario the Vivid i is configured to work with a DICOM
server in a network environment. Images are first saved on the
local image buffer on the scanner. At the end of the
examination the images are sent to the DICOM server via a
DICOM spooler.
The DICOM server dataflow supported are:
• Local Archive - Int HD/DICOM Server : the local archive is
used for patient archiving. Images are stored to the internal
harddrive and to a DICOM server.
• Remote Archive - Remote HD/DICOM Server : a remote
database is used for patient archiving. Images are stored to
a network image volume and to a DICOM server.
• Worklist/Local Archive - DICOM Server/Int HD : search in
a DICOM Modality Worklist, the patient found is copied into
local database. The patient information and the
examination results are stored to the local database.
Images are stored to a DICOM server and to an image
volume on the local harddrive.
• Worklist/Remote Archive - DICOM Server/Remote HD :
search in a DICOM Modality Worklist, the patient found is
copied into a remote database. The patient information and
the examination results are stored to a remote database.
Images are stored to a DICOM server and to an image
network volume as pure DICOM in both locations.
• Query/Retrieve : retrieve images from a DICOM server
based on query parameters.
This scenario requires that the scanner is configured to be
connected to the DICOM server as described below.
Scanner’s connectivity configuration
The scanner’s TCP/IP settings must be configured as
described in "Scanner’s TCP/IP settings" on page 193.
In addition, to work against the DICOM server the following
information has to be entered in the scanner:
• The DICOM server IP address
• The DICOM server port number
To Purchase, Visit Avobus.com or call 1-800-674-3655