Archiving
Vivid i User’s Manual
193
2378958-100 Rev. 02
Scanner’s TCP/IP settings
To be able to use the network functions when connected to a
hospital network, the scanner must have a proper network
address. Typically source for this information in the network
administrator.
1.
Press
CONFIG
and log on as administrator.
2.
Select the
Connectivity
category and
TCP/IP
subgroup.
The
TCPIP subgroup
is displayed.
Figure 8-31: TCP/IP setting
3.
In the
IP settings area
enter:
• The IP address for the scanner
• The subnet mask for the scanner
• The IP address for the Default Gateway
1.
Computer name: device’s name of type
VIVID7-00nnnn or ECHOPAC7-00nnnn, where
“nnnn” is the system’s serial number. Do not
change the computer name.
2.
IP settings: system IP settings
3.
Remote archive setup: remote archive IP
address and name (EchoPAC PC or
EchoServer)
4.
Save TCP/IP settings. The changes will be
effective after the system is rebooted.
Summary of Contents for Vivid i
