Critical Power
Modifications reserved
Page 26/146
GE_UPS_OPM_TLE_SCE_M60_M80_1GB_V020.docx
User Manual
TLE Series 600 & 800 CE S1
5
INSTALLATION
5.1
TRANSPORT
The UPS is packaged on a pallet suitable for handling with a forklift.
The UPS must be moved in
upright position
.
Do not tilt cabinets
more than +/- 10°
during handling.
Move the UPS in its original package to the final destination site
.
Do not stack other packages on top
: This could damage the UPS.
Forklift
Fig. 5.1-1 Position of the forklift when moving the unpacked UPS
Forklift
The UPS may be lifted with a forklift in
upright position.
Take note of the
centre of gravity
marked on the package.
Crane
Fig. 5.1-2 Position of the carrying belts when moving the unpacked UPS
WARNING !
Check for sufficient floor and
elevator loading capacity.
Transport UPS only in upright
position.
Do not stack other package on top
of the UPS.
Crane
If the UPS has to be lifted by crane, use
suitable carrying belts taking note of the
centre of gravity
marked on the
package.
Take all necessary precautions to
avoid damage to the cabinet while
hoisting the UPS
.
WARNING !
When loading / unloading and when
moving the UPS, it is forbidden:
When loading / unloading and when
moving the UPS, pay attention to:
