GE RPV311, Technical Manual

Page: 189 / 295

Chapter 13
– RPV Manager
RPV311
RPV311-TM-EN-7 189
2.1.3 Auto Polling
With the Auto Polling tab the user can check the number of files that have been
downloaded and the number of files waiting to be downloaded.
When active, the software will check which records have not yet been saved and will
download them. Records will only be downloaded automatically from equipment
with Auto Polling enabled.
A background colour indicates that the equipment is being checked.
During the download, the data is updated on the screen as the records are
transferred.
2.1.4 Download Modes

Automatic download:
The procedure to activate the
Auto Polling
can be seen in the Settings Menu 2.2.2.

Manual Download:
Selected records
:
Select the records required, and click the button “Get Selected”;
All records
:
Click "Get All".
Double click on the downloaded record to open (it is necessary to have a software to
open .zic files already installed).
To close this window use the close button in the top right, or use File >Exit.
A confirmation message will be shown after closing.
2.2 RPV Manager Settings
RPV Manager presents some settings that user can access through the menu bar.
These settings are shown below.
2.2.1 File Menu
In the File menu, the user can:

Open COMTRADE folder;
The Open containing folder option will open the default register's downloaded folder.
By default, the folder is
C:\RPV\Records.

, Refresh All Devices.
 Refresh the list with COMTRADE files (but does not download them);

Refresh Alarms tab;

Check alarms to send email/fax when new ones are exist;