GE RPV311 Technical Manual Download

Page: 119 / 295

RPV311

Chapter 5

– Operation

RPV311-TM-EN-7

119

The <D

ETAILS

> button allows user to view information about the record. This

information is also included in the .HDR file.

The <C

OMTRADE

> button allows download of record, line per line, and saving it in the

COMTRADE format, and compression as .zic file.

The <C

LOSE

> button allows user to close the section.

2.6.2

Traveling Wave Recorder

The Traveling wave recorder screen, shown in

Figure 61

displays a history of

equipment traveling wave records.

Figure 61: Traveling Wave recorder screen

The Search box allows user to choose the period of time of the oldest to the latest

to display.

The Manual Filter box allows user to filter the records manually, according to the

their selection.

The <L

IST

> button allows user to show the list of records according to the filtering

parameters. If clicking <L

IST

> finds no record available, a window will be opened with

a message: "No records available´´. So click <O

> and return to the previous section.

Fault records listed, with the following information:

Summary of Contents for RPV311








































































































































































































































































































Search results

Summary of Contents for RPV311

Reviews:

Related manuals for RPV311

Brands by name

Popular brands

GE RPV311, Technical Manual

Search results

Summary of Contents for RPV311

Reviews:

Related manuals for RPV311

Brands by name

Popular brands