GE RPV311, Technical Manual

Page: 131 / 295

RPV311 Chapter 5
– Operation
RPV311-TM-EN-7 131
2. Another window will open indicating that all open Web Interface windows should
be closed (except the key window). Close the windows and click on the <O
K
>
button.
3. Copy the code key sent by e-mail and enter it in the <K
EY
> box to replace the old
one. Then click on the <T
RANSMIT
> button.
3 COMTRADE files download
There are four different ways to get the COMTRADE files from the RPV311 to a
computer, one manual way and three automatic way.
The manual method uses the web interface and is described in the item Chapter 5:
Operation, 1.3.3 Records
The three ways automatic ways listed below:
 Scanner software ( Chapter 12: Software – RPV Tools): Simple platform that
download specific types of files (fault, disturbance, SOE, TW...) from specific
IP address with preset time intervals.

RPV Manager (Chapter 13: Software – RPV Manager): Elaborate software
that downloads the records from several separate RPVs, performs TW fault
location and shows the equipment alarms.
 Auto-upload which is a feature of the RPV where the user specifies an IP
address and prepare a computer to be the server. Upon creating a record
the RPV will automatically send it to the destination IP. If for some reason, it
is not able to send the record at that time it will not send again later.
All those means save the record to a folder named based on the DFR’s information
LOCATION,IDENTIFIER within another folder located in C:\RPV\records\.