GE RPV311, Technical Manual

Page: 48 / 295

Chapter 4
– Configuration
RPV311
48 RPV311-TM-EN-7
Figure 9: Equipment identification configuration section
A The I
DENTIFIER
text field allows user to enter an equipment code (maximum 12
characters).
B The L
OCATION
text field allows user to enter a substation code (maximum 12
alphanumeric characters, _ , − , 0 , 0-9 , a-z , A-Z)
C The O
WNER
text field allows user to enter the name of the company which
purchased the equipment (maximum 12 characters).
2.2 Synchronization
If the IRIG-B signal has the CF extensions (IEEE1344), timing information as date, hour,
year, time zone and daylight saving time can be provided by the signal. Time zone
and daylight saving time information can also be manually set via the Web Interface,
overriding the information of the IRIG-B signal.
2.2.1 Time Source
On the screen T
IME SOURCE
it is possible to configure how the RPV311 will interpret the
time zone of the IRIGB signal and also the IP address of the NTPv2, 3 or 4 server.
The configurable settings are:
A The T
IMEZONE
defines if time zone information is supplied by the IEEE1344
extensions of the IRIG-B signal, or if it is manually set. This option will allow the