GE RPV311 Technical Manual Download

Page: 120 / 295

Chapter 5

– Operation

RPV311

120

RPV311-TM-EN-7



Time stamp:

indicates the date and time of event log (yyyymm-dd

hh:mm:ss[.uuuuuu]

0000 (UTC time offset);



Cause:

indicates threshold exceeded;



Terminal:

terminal where the traveling wave was detected.

The <D

ETAILS

> button allows user to view information about the record. This

information is also included in the .HDR file.

The <C

OMTRADE

> button allows download of record, line per line, and saving it in the

COMTRADE format, and compression as .zic file.

The <C

LOSE

> button allows user to close the section.

2.6.3

Steady-state

The Steady-state recorder screen, shown in

Figure 62

displays a history of

equipment steady-state records.

Figure 62: Steady-state recorder screen

The Search box allows user to choose the period of time of the oldest to the latest

to display.

Summary of Contents for RPV311








































































































































































































































































































Search results

Summary of Contents for RPV311

Reviews:

Related manuals for RPV311

Brands by name

Popular brands

GE RPV311, Technical Manual

Search results

Summary of Contents for RPV311

Reviews:

Related manuals for RPV311

Brands by name

Popular brands