GE RPV311, Technical Manual

Page: 57 / 295

RPV311 Chapter 4
– Configuration
RPV311-TM-EN-7 57
Figure 16: Equipment access control configuration section
A The U
SE PASSWORD FOR ALL ACCESS LEVELS
check box enables use of password to
access equipment operation and configuration via Web Interface.
B The F
IRMWARE UPDATE PASSWORD
text field allows user to enter an independent
password to update the firmware for the equipment. The factory-set default
password is 12345. This field cannot be disabled.
C The D
OWNLOAD PASSWORD
text field allows user to enter an independent password to
access the automatic file records scanning. The factory-set default password is
12345. This field cannot be disabled.
D The GOOSE
CONFIGURATION PASSWORD
text field allows user to enter an independent
password to configure the GOOSE application. The factory-set default password is
12345. This field cannot be disabled.
The password can have up to 8 characters and following ones are allowed:
Alphabetic, numeric, upper and lower case, dash (-) and underscore (_).
2.7 User
It is possible to either add a new user or configure the administrator user.
In the Add a new user section, shown in
Figure 17 , it is possible to add users with
different access levels.