NX-10 Installers manual
57
Figure 17. Report codes menu
The control panel can report to a central station after all or specified events. Communication between
the control panel and the central station is monitored to ensure against damage or faults. The control
panel can also communicate with up/download software when a download session has been
established. To program control panel communication options, select
Installer Menu>Control
Panel>Communications.
Defining communication with a central station
You can specify up to three central stations to which the control panel reports events. You can also
select the events to be reported to each station. For more information on setting up a communicator,
see
Appendix 3, Communicator formats
.
You can set a number of conditions that must be met before a communication session is established
between the control panel and the central station. To enable restore report options, you must enable
the advanced menu.
The following example configures the control panel to ring the central station three times before a
fail to communicate condition occurs for the Phone Number 1.
1.
Ensure the advanced menu is enabled.
2.
Navigate with the
½¾
keys to
Control Panel>Communications>Central Station
and
(1) Day Zone
Event Code
SIA Code
CID Code
2.4.4.3.1.1.1
2.4.4.3.1.1.2
2.4.4.3.1.1.3
Zone Types
Report Codes
2.4.4.3
2.4.4.3.1
2.4.4.3.1.1
Zone Types 2 - 0
Same as above
3
Restore
Bypass
Tamper
Trouble
Sensor Low Battery
Sensor Lost
Opening
Closing
Duress Code
Keypad Aux 1 (Fire)
Keypad Aux 2 (Medical)
Keypad Panic
Keypad Tamper
Partition Reports
Keypad
2.4.4.3.2
2.4.4.3.3
2.4.4.3.2. 1
1.
2.4.4.3.2. 2
1.
2.4.4.3.2. 3
1.
2.4.4.3.2. 4
1.
2.4.4.3.2. 5
1.
2.4.4.3.2. 6
1.
2.4.4.3.3.1
2.4.4.3.3.2
2.4.4.3.3.3
2.4.4.3.3.4
2.4.4.3.3.5
Box Tamper
Siren Tamper
Phone Line Cut
Expander Trouble
Fail to Communicate
Mains Failure
Low Battery
Aux Overcurrent
Power
Tamper/Fault
2.4.4.3.4
2.4.4.3.5
2.4.4.3.4.1
2.4.4.3.4.2
2.4.4.3.4.3
2.4.4.3.5.1
2.4.4.3.5.2
2.4.4.3.5.3
Log Full
Autotest
Cancel
Recent Closing
Start/End Programming
End Download
Miscellaneous
2.4.4.3.6
2.4.4.3.6.1
2.4.4.3.6.2
2.4.4.3.6.3
(1) Partition 1
2.4.4.3. .1
2
Partitions
4
2 -
Same as above
2.4.4.3.2.1.7
2.4.4.3.2.1.8
2.4.4.3.5.5
2.4.4.3.5.4
2.4.4.3.6.4
2.4.4.3.6.6
2.4.4.3.6.5
For slow speed formats only
For slow speed formats only
For slow speed formats only
For slow speed formats only
For slow speed formats only