GE NX-10 Installer Manual Download

Page: 39 / 257

NX-10 Installers manual

Press

to cancel the change and return to the menu option.

Changing binary entries

Navigate with the

½¾

keys to the relevant menu option and press

The current value for the menu option is displayed, for example,

1 2 3 - - - - 8

means that

1, 2, 3 and 8 are on (included) while 4, 5, 6 and 7 are off (excluded).

Press the corresponding numerical key to change a value, for example, press

to change

the state of 1 to off and press

to change the state of 4 to on. The display changes to

- 2 3

4 - - - 8

Press

to accept the changes.

•

If the new values are valid, the keypad beeps once to confirm the change and returns
to the menu option.

•

If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.

Press

to cancel the changes and return to the menu option.

Changing numeric entries

Navigate with the

½¾

keys to the relevant menu option and press

The current value for the menu option is displayed, for example, 55.

Do one of the following:

•

Press a number key to clear the current value and display the value of the key pressed.

•

Press

to increase the current value by one.

•

Press

to decrease the current value by one.

•

Press

to clear the current value to 0.

Press the number keys to enter the value.

Press

to accept the changes.

•

If the new value is valid, the keypad beeps once to confirm the change and returns to
the menu option.

•

If the new value is invalid, the keypad beeps three times to reject the change and
returns to the menu option.

Press

to cancel the changes and return to the menu option.

Changing phone numbers and phone prefixes

Navigate with the

½¾

keys to the relevant menu option and press

The current value for the menu option is displayed, for example,

4567999

Do one of the following:

•

Press

to toggle between insert mode and overwrite mode (insert mode allows you

to insert new numbers and overwrite mode allows you to overwrite existing numbers).

Summary of Contents for NX-10


































































































































































































































































Search results

Summary of Contents for NX-10

Reviews:

Related manuals for NX-10

Brands by name

Popular brands

GE NX-10, Installer Manual

Search results

Summary of Contents for NX-10

Reviews:

Related manuals for NX-10

Brands by name

Popular brands